Strips
The longitudinal slitting of coils into special-sized strips is the core business of L.M. Laminati Metallici.
Ultra-thin thicknesses (between 0.10 and 1.20 mm) and ultra-narrow widths (down to 4 mm) are our strength.
Complex slitting configurations, with up to 40 strips in line, are part of the daily operations at L.M. Laminati Metallici.
Low Carbon Steels
- Cold Rolled (according to UNI EN 10131 and 10140)
- Black Plate (according to UNI EN 10205)
- Electrolytic Tinplate (according to UNI EN 10202)
- Electrolytic Chromium-Coated Steel (according to UNI EN 10202)
- Electrogalvanized (according to UNI EN 10131)
- Pre-painted
Coated Steels
- Hot-dip Galvanized (according to UNI EN 10143)
- Aluzinc (according to UNI EN 10143)
Stainless Steels
(only for third-party processing)
- AISI 304 Series
- AISI 316 Series
- AISI 430 Series
- AISI 439 Series
Aluminum
(only for third-party processing)
Brass
(only for third-party processing)
L.M. Laminati Metallici is a Service Center specializing in the cutting of flat steel products, offering ultra-thin thicknesses and ultra-narrow widths that exceed industry standards.
The core business is longitudinal slitting into strips, with thicknesses below 0.30 mm down to a minimum of 0.10 mm, and widths ranging from as narrow as 4.0 mm to the full coil width. All equipment is capable of processing any steel grade up to a maximum thickness of 1.2 mm.
These highly specialized dimensions can be supplied to customers in either "standard" format, with a single coil winding, or in a special format known as "oscillated" (matassato). The latter type of winding is available in various combinations of inner/outer diameters and different support options.
L.M. Laminati Metallici ensures the highest quality by adhering to the strictest UNI EN standards for thickness and width tolerances.
L.M. Laminati Metallici can supply strips in oscillated wound coils instead of standard single coils, giving customers the advantage of additional meters of steel.
Discover more about oscillated wound coils
